* 소스기기의 HDMI출력부에서 DC 5V가 포함되지 않는경우 (일부 VGA카드등) 별매 DC어댑터를 사용해야 합니다. 일반적인 표준 HDMI포트에서는 반드시 전원이 포함되어 있으므로 사용할 필요가 없습니다.*

HDMI인터페이스 자체전원을 이용하므로 별도의 AC어댑터를 사용하지 않습니다.

현재 전세계적으로 판매되고 있는 HDMI리피터 및 이퀄라이저중 가장 좋은 성능을 보증합니다.

구매후 어떠한 이유로든지 반품이 100% 가능합니다. ( 품질보장)

종단부 (소스기기쪽이 아니라 HDTV,프로젝터,LCD쪽)에 접속하여 최대 40~60M까지 안정적으로 HDMI신호전송이 가능합니다.

TrueAV 장거리 HDMI케이블과 조합시 최적의 성능을 발휘할 수 있습니다.

The HDMI Repeater extends the length of any HDMI cable by regenerating the HDMI signal before it outputs to the HDMI monitor or projector.
The HDMI Repeater will clean out the digital noise (sparkles) in your picture.
The input of the HDMI repeater is connected with a long HDMI (male to male) cable from the HDMI device like DVD player or Satellite set top box with a HDMI output port.The HDMI repeater output is connected to a second HDMI (male to male) cable to go from the output to any HDMI display or projector with a HDMI connector.
The box is placed near the display to remove any noise that has been generated by a long HDMI cable. The HDMI Repeater unit can be daisy chain two cables (up to four cables with four HDMI Repeater unit) together and create a longer HDMI extension.

FEATURES
* Connects HDMI DVD or devices with HDMI outputs to HDMI compatible displays or projectors.
* Allows to extend the HDMI cable distance, between the HDMI player and HDMI TV set,
  to 40Meter (35 Meter HDMI cable+ 5 Meter HDMI cable).
* With daisy chain 4 units of the HDMI Repeater, will allows to extend the HDMI cable
  distance to 145Meter (35Meter x 4 + 5 Meter).
* Maintains highest HDMI single link video resolution 1080
* Supports DDWG standard for HDMI compliant monitors
* Supports full HDMI audio and video
* HDCP Compliant
* inc Alloy Shell for better EMI elimination

SPECIFICATIONS:
-HDMI Amplifier Bandwidth: 1.65 GHz
-Actual Bandwidth: 1.6 GHz
-Input Video Signal: 1.2 Volts p-p
-Input DDC Signal: 5 Volts p-p (TTL)
-HDMI Input/Output Connector: Type A 19 pin
-Power Consumption: 15 Watts (max.)
-Power Supply: External 5V DC
-Dimensions: 5CM x 2.8CM x 1.8CM
-Shipping Weight

PACKAGE CONTENTS
-HDMI Repeater
-Users Manual

CONNECT AND OPERATE
1) Connect the HDMI device output into TRP0101 input and connect the
 TRP0101 output to the HDMI display unit. The HDMI device is put close
 to the HDMI display unit (Input cables are optional)
*Please refer to connection diagram section.
2) Insert the DC side of 5v power supply if more than one TRP0101 unit is using.
3) Turn on the power of those HDMI devices.

Attention: Insert / Extract cable gently.