새 페이지 1
The Extron MSW 4V SDI rs is a SDI Serial Digital Interface video switcher
with buffered, re-clocked outputs on BNC connectors. With two parallel outputs
for simultaneous viewing on a monitor and projector the MSW 4V SDI rs includes a
contact closure connector for remote control, as well as input selection buttons
with LED indicators for each input.
Autoswitching is selectable via buttons on the front panel. An LED on the
front panel indicates that the autoswitching feature is on. The MSW 4V SDI rs is
compatible with all composite, component, and wide-screen serial standards. Part
of the Extron VersaTools® product line, the MSW 4V SDI rs comes in a 1U,
quarter rack width metal enclosure.
| MSW 4 rs Series Switchers |
|
| Video — MSW 4V rs, MSW 4SV rs |
| Gain |
Unity |
| Bandwidth |
|
| MSW
4V |
300 MHz (-3 dB) |
| MSW
4SV |
250 MHz (-3 dB) |
| Crosstalk |
<-60 dB @ 3.58 MHz |
| Switching speed |
20 ms (max.) |
|
| Video — MSW 4V SDI rs |
| Resolution |
8 or 10 bits, automatic |
| Operation standards |
143 Mb/s (4fsc NTSC)
177 Mb/s (4fsc PAL)
270 Mb/s (4:2:2) component video
360 Mb/s (4:2:2) widescreen, autoselect |
| Equalization and reclocking |
Automatic for up to -30 dB of cable loss |
| Automatic data rate clock |
Yes |
|
| Video input |
| Number/signal type |
|
| MSW
4V rs |
4 composite video |
| MSW
4SV rs |
4 S-video |
| MSW
4V SDI rs |
4 serial digital component video |
| Connectors |
|
| MSW
4V rs, MSW 4V SDI rs |
4 female BNC |
| MSW
4SV rs |
4 female 4-pin mini DIN |
| Nominal level |
1 Vp-p for Y of S-video and for composite video
0.3 Vp-p for C of S-video
0.8 Vp-p for SDI |
| Minimum/maximum levels (MSW
4V rs, MSW 4SV rs) |
0.4 V to 2.0 Vp-p with no offset |
| Impedance |
75 ohms |
| Return loss |
|
| MSW
4SV rs |
<-25 dB, DC @ 10 MHz |
| Other
models |
<-40 dB, DC @ 10 MHz |
| DC offset (max. allowable) |
5.0 V |
| Input coupling |
|
| MSW
4V rs, MSW 4SV rs |
DC |
| MSW
4V SDI rs |
AC |
|
| Video output |
| Number/signal type |
|
| MSW
4V rs |
2 composite video |
| MSW
4SV rs |
1 S-video, 1 composite video |
| MSW
4V SDI rs |
2 reclocked SMPTE-259 serial digital component video |
| Connectors |
|
| MSW
4V rs, MSW 4V SDI rs |
2 BNC female |
| MSW
4SV rs |
1 BNC female, (1) 4-pin mini DIN female |
| Nominal level |
1 Vp-p for Y of S-video and for composite video
0.3 Vp-p for C of S-video
0.8 Vp-p for SDI |
| Minimum/maximum levels (MSW
4V rs, MSW 4SV rs) |
0.4 V to 2.0 Vp-p |
| Impedance |
75 ohms |
| Return loss |
|
| MSW
4V/4SV rs |
<-30 dB @ 5 MHz |
| MSW
4V SDI rs |
<-25 dB @ 5 MHz |
| |
|
| DC offset |
±5 mV maximum with input at 0 offset |
| Switching type (MSW 4V
rs/4SV rs) |
Vertical interval |
| Jitter (MSW 4V SDI rs) |
<2 µs |
| Rise/fall time (20-80%, MSW
4V SDI |
rs)
700 ps ±100 ps |
| Re-clocking (MSW 4V SDI rs) |
Automatic, bypass mode for nonstandard rates |
|
| Sync |
| Standards |
|
| MSW
4V rs, MSW 4SV rs |
NTSC 3.58, NTSC 4.43, PAL, SECAM |
| MSW
4V SDI rs |
SMPTE-259M |
|
| Control/remote — switcher |
| Serial control port |
1 RS-232, 3.5 mm captive screw connector, 5 pole |
| Baud rate and protocol |
9600 baud, 8 data bits, 1 stop bit, no parity |
| Serial control pin
configurations |
1 = TX, 2 = RX, 3 = GND |
| Contact closure |
(1) 3.5 mm captive screw connector, 5 pole |
| Contact closure pin
configurations |
1 = input 1, 2 = input 2, 3 = input 3, 4 = input 4, 5 = GND |
| Program control |
Extron's Universal Switcher program for Windows®
Extron's Simple Instruction Set (SIS™) |
|
| General |
| External power supply |
100 VAC to 240 VAC, 50/60 Hz, external, autoswitchable; to
12 VDC, regulated |
| Power input requirements |
|
| MSW
4V rs, MSW 4SV rs |
12 VDC, 0.2 A |
| MSW
4V SDI rs |
12 VDC, 0.4 A |
| Temperature/humidity |
Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%,
noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Rack mount |
Yes, with optional 1U, 9.5" deep rack shelf, part
#60-190-01 or 60-604-01; or 6" deep rack shelf, part #60-190-10 or
#60-604-10; or VersaTools® 3" deep rack shelf, part #60-190-20 or
60-604-20; also under-furniture mountable with optional brackets
#70-212-01 |
| Enclosure type |
Metal |
| Enclosure dimensions |
1.7" H x 4.3" W x 3.0" D (1U high, quarter
rack wide)
4.3 cm H x 10.9 cm W x 6.5 cm D
(Depth excludes connectors.) |
| Product weight |
0.6 lbs (0.3 kg) |
| Shipping weight |
3 lbs (2 kg) |
| Vibration |
ISTA 1A in carton (International Safe Transit Association) |
| Listings |
UL, CUL |
| Compliances |
CE, FCC Class A, VCCI, AS/NZS, ICES |
| MTBF |
30,000 hours |
| Warranty |
3 years parts and labor |
 |
