|
|
|
Specifications — VersaTools®
MDA Series |
|
|
|
Video |
|
Gain |
Unity |
|
Bandwidth |
|
|
MDA
3SV/3SVA/3SV Dual, MDA 5SV |
270 MHz (-3 dB) |
|
MDA 3V/3AV/3V
Dual, MDA 5V |
435 MHz (-3 dB) |
|
|
|
Video input |
|
Number/signal type |
|
|
MDA 3SV/3SVA,
MDA 5SV |
1 S-video |
|
MDA 3SV Dual |
2 S-video |
|
MDA 3V/3AV,
MDA 5V |
1 composite
video |
|
MDA 3V Dual |
2 composite
video |
|
Connectors |
|
|
MDA 3SV/3SVA,
MDA 5SV |
(1) 4-pin mini DIN female |
|
MDA 3SV Dual |
(2) 4-pin
mini DIN female |
|
MDA 3V/3AV,
MDA 5V |
1 BNC
female |
|
MDA 3V Dual |
2 BNC
female |
|
Nominal level |
1 Vp-p for
Y of S-video and for
composite video
0.3 Vp-p for C of S-video |
|
Minimum/maximum
levels |
0.4 V to
2.0 Vp-p for composite video
or Y of S-video with no
offset |
|
Impedance |
75 ohms |
|
Return loss |
|
|
MDA 3SV/3SVA,
MDA 5SV, |
|
|
MDA 3SV Dual |
<-25 dB @ 0
to 10 MHz |
|
All other
models |
<-27 dB @ 5
MHz |
|
DC offset (max.
allowable) |
5.0 V |
|
Input coupling |
AC |
|
|
|
Video output |
|
Number/signal type |
|
|
MDA 3SV/3SVA |
3 buffered
S-video |
|
MDA 3SV Dual |
2 x 3
buffered S-video |
|
MDA 5SV |
6 S-video:
5 buffered for distribution,
1 passive loop-through
|
|
MDA 3V/3AV |
3 buffered
composite video |
|
MDA 3V Dual |
2 x 3
buffered composite video |
|
MDA 5V |
6 composite
video: 5 buffered for
distribution, 1 passive
loop-through |
|
Connectors |
|
|
MDA 3SV/3SVA |
(3) 4-pin
mini DIN female |
|
MDA 3SV Dual |
(6) 4-pin
mini DIN female |
|
MDA 5SV |
(6) 4-pin
mini DIN female |
|
MDA 3V/3AV |
3 BNC
female |
|
MDA 3V Dual |
6 BNC
female |
|
MDA 5V |
6 BNC
female |
|
Nominal level |
1 Vp-p for
Y of S-video and for
composite video
0.3 Vp-p for C of S-video |
|
Minimum/maximum
levels |
0.4 V to
2.0 Vp-p, follows input |
|
Impedance |
75 ohms |
|
Return loss |
<-30 dB @ 5
MHz |
|
DC offset |
±50 mV with
input at 0 offset |
|
|
|
Sync |
|
Standards |
NTSC 3.58,
NTSC 4.43, PAL, SECAM |
|
|
|
Audio — MDA 3AV, MDA 3SVA,
MDA 3A/3A RCA, MDA 5A RCA |
|
Gain |
|
|
DIP switch set
to match output type |
Unity (0 dB) |
|
DIP switch not
matched to output type |
|
|
Frequency response |
20 Hz to 20
kHz, ±0.05 dB |
|
THD + Noise |
0.03% @ 1
kHz at nominal level |
|
S/N |
|
|
MDA 3A/5A
RCA |
>90 dB,
unbalanced, at maximum
output |
|
All other
models w/audio |
|
|
|
>90 dB,
balanced at maximum output |
|
Stereo channel
separation |
>80 dB @ 1
kHz; >60 dB @ 20 kHz |
|
CMRR |
>75 dB @ 20
Hz to 20 kHz |
|
|
|
Audio input — MDA 3AV, MDA
3SVA, MDA 3A/3A RCA, MDA 5A
RCA |
|
Number/signal type |
|
|
MDA 3A RCA,
MDA 5A RCA |
1 stereo unbalanced |
|
MDA 3AV, MDA
3SVA, MDA 3A |
1 stereo balanced/unbalanced |
|
Connectors |
|
|
MDA 3A RCA,
MDA 5A RCA |
2 RCA connectors |
|
MDA 3AV, MDA
3SVA, MDA 3A |
(1) 3.5 mm captive screw
connector, 5 pole |
|
Impedance |
|
|
MDA 3A RCA,
MDA 5A RCA |
>10k ohms unbalanced, DC
coupled |
|
MDA 3AV, MDA
3SVA, MDA 3A |
>50k ohms unbalanced, >25k
ohms balanced, DC coupled |
|
Nominal level |
+4 dBu
(1.23V), 0 dBu (0.775 V),
-10 dBV (316 mV), -20 dBV
(100 mV) compatible |
|
Maximum level |
|
|
MDA 3A/5A
RCA |
+17 dBu
(unbalanced) at 1%THD+N |
|
All other
models w/audio |
|
|
|
+24 dBu
(balanced) at 1%THD+N |
| NOTE |
|
0 dBu = 0.775 Vrms,
0 dBV = 1 Vrms, 0
dBV ≈ 2 dBu |
|
|
|
|
Audio output — MDA 3AV, MDA
3SVA, MDA 3A/3A RCA, MDA 5A
RCA |
|
Number/signal type |
|
|
MDA 5A RCA |
5 stereo,
unbalanced |
|
MDA 3A RCA |
3 stereo,
unbalanced |
|
MDA 3AV, MDA
3SVA, MDA 3A |
3 stereo,
balanced/unbalanced |
|
Connectors |
|
|
MDA 5A RCA |
10 RCA
connectors |
|
MDA 3A RCA |
6 RCA
connectors |
|
MDA 3AV, MDA
3SVA, MDA 3A |
(3) 3.5 mm captive screw
connectors, 5 pole |
|
Impedance |
|
|
MDA 3A RCA,
MDA 5A RCA |
50 ohms unbalanced |
|
MDA 3AV, MDA
3SVA, MDA 3A |
50 ohms unbalanced, 100 ohms
balanced |
|
Gain error |
±0.1 dB
channel to channel |
|
Maximum level
(Hi-Z) |
|
|
MDA 3A/5A
RCA |
+15 dBV,
unbalanced, at 1%THD+N |
|
All other
models w/audio |
|
|
|
>+24 dBu,
balanced at 1%THD+N |
|
Maximum level (600
ohm) |
|
|
MDA 3A/5A
RCA |
>+14 dBm,
unbalanced, at 1%THD+N |
|
All other
models w/audio |
|
|
|
>+15 dBm,
balanced or unbalanced, at
1%THD+N |
|
|
|
General |
|
External power
supply |
100 VAC to
240 VAC, 50/60 Hz, 5 watts,
external, autoswitchable; to
12 VDC,
1 A (max.), regulated |
|
Power input
requirements |
|
|
MDA
3V/3SV/5V/5SV |
12 VDC, 0.1
A (max.) |
|
MDA 3AV/3SVA |
12 VDC, 0.3
A (max.) |
|
All other
models |
12 VDC, 0.2
A (max.) |
|
Temperature/humidity |
Storage:
-40 to +158 °F (-40 to +70
°C) / 10% to 90%,
noncondensing
Operating: +32 to +122 °F (0
to +50 °C) / 10% to 90%,
noncondensing |
|
Rack mount |
Yes, with
optional 1U rack shelf, part
#60-190-01, or 60-604-01;
or the VersaTools® rack
shelf, part #60-190-20, or
60-604-20 |
| |
Also
furniture mountable with
optional under desk mount
kit,
#70-212-01, or attachable to
a projector mount with
optional PMK 100 projector
mount kit #70-217-01 |
|
Enclosure type |
Metal |
|
Enclosure
dimensions |
1.7" H x
4.3" W x 3.0" D (1U high,
quarter rack wide)
4.2 cm H x 11.0 cm W x 7.6
cm D
(Depth excludes connectors
and knobs.) |
|
Product weight |
|
|
MDA 3V, MDA
3SVA |
0.4 lbs
(0.2 kg) |
|
MDA 3V Dual |
0.7 lbs
(0.3 kg) |
|
MDA 3AV |
0.6 lbs
(0.3 kg) |
|
MDA 5V, MDA
5SV |
0.5 lbs
(0.2 kg) |
|
MDA 3SV |
0.4 lbs
(0.2 kg) |
|
MDA 3SV Dual,
MDA 3A |
0.5 lbs
(0.2 kg) |
|
MDA 3A/5A
RCA |
0.4 lbs
(0.2 kg) |
|
Shipping weight |
|
|
MDA 3V, MDA 3V
Dual |
3 lbs (2
kg) |
|
MDA 3AV, MDA
5V |
3 lbs (2
kg) |
|
MDA 3SV, MDA
3SV Dual |
2 lbs (1 kg) |
|
MDA 3SVA, MDA
5SV |
2 lbs (1
kg) |
|
MDA 3A/5A
RCA |
2 lbs (1
kg) |
|
Vibration |
ISTA 1A in
carton (International Safe
Transit Association) |
|
Listings |
UL, CUL |
|
Compliances |
CE, FCC
Class A, VCCI, AS/NZS, ICES |
|
MTBF |
30,000
hours |
|
Warranty |
3 years
parts and labor |
| NOTE |
|
All nominal levels
are at ±10%. |
|
| NOTE |
|
Specifications are
subject to change
without notice. |
|
|
(7.52-082906-D12) |
|
|
|
