P/2 DA2xi
Series |
|
Video |
Gain |
Selectable:
0.7 V (unity), or 0.75 V |
Peaking |
Selectable:
0 dB or 6 dB @100 MHz |
Bandwidth |
350 MHz (-3
dB) |
|
Video input |
Number/signal type |
1 VGA-UXGA
RGBHV, RGBS, RGsB, RsGsBs
input |
Connectors |
(1) 15-pin
HD female |
Nominal level |
0.7 Vp-p
for RGB |
Minimum/maximum
levels |
Analog, 0.3
V to 1.5 Vp-p with no offset
at unity gain |
Impedance |
75 ohms |
Horizontal
frequency |
15 kHz to
135 kHz |
Vertical frequency |
30 Hz to
170 Hz |
Return loss |
<-38 dB @ 5
MHz |
DC offset (max.
allowable) |
1.0 V |
Input coupling |
DC |
|
Video output |
Number/signal type |
1 VGA-UXGA
RGBHV, RGBS, RGsB, RsGsBs
output
1 VGA-UXGA RGBHV, RGBS,
RGsB, RsGsBs local monitor
loop-through (i.d. bits are
passed through) |
Connectors |
(2) 15-pin
HD female |
Nominal level |
0.7 Vp-p
for RGB at unity gain |
Minimum/maximum
levels |
Analog, 0.3
V to 1.5 Vp-p (follows
input) |
Impedance |
75 ohms |
Return loss |
<-40 dB @ 5
MHz |
DC offset |
¡¾5 mV with
input at 0 offset |
|
Sync |
Input type |
RGBHV,
RGBS, RGsB, RsGsBs |
Output type |
RGBHV,
RGBS, RGsB, RsGsBs |
Input level |
1.5 V to
5.0 Vp-p |
Output level |
TTL, 4 V to
5 Vp-p, unterminated |
Input impedance |
510 ohms |
Output impedance |
75 ohms or
55 ohms, switchable (output
impedance resistors are 50
and 30 ohms) |
Max input voltage |
5.0 Vp-p |
Max. propagation
delay |
60 ns |
Max. rise/fall
time |
4 ns |
Polarity |
Positive or
negative (follows input) |
|
Audio — P/2 DA2xi MT only |
Gain |
Unbalanced
output: 0 dB; balanced
output: +6 dB |
Frequency response |
20 Hz to 20
kHz, +0.05 dB, -0.1 dB |
THD + Noise |
0.03% @ 1
kHz at nominal level |
S/N |
>90 dB
(balanced) at maximum output |
Crosstalk |
<-80 dB @ 1
kHz, fully loaded |
Stereo channel
separation |
>80 dB @ 1
kHz, >60 dB @ 20 kHz |
CMRR |
>67 dB @ 20
Hz to 20 kHz |
|
Audio input — P/2 DA2xi MT
only |
Number/signal type |
1 stereo,
unbalanced |
Connectors |
(1) 3.5 mm
stereo jack, female; tip
(L), ring (R), sleeve (GND) |
Impedance |
>18k ohms
unbalanced, DC coupled |
Nominal level |
-10 dBV
(316 mV) |
Maximum level |
>+10 dBV
(3.16 V) (unbalanced) at
1%THD+N |
NOTE |
|
0 dBu = 0.775 Vrms,
0 dBV = 1 Vrms, 0
dBV ≈ 2 dBu |
|
|
Audio output — P/2 DA2xi MT
only |
Number/signal type |
1 stereo,
balanced/unbalanced |
Connectors |
(1) 3.5 mm captive
screw connector, |
5
pole |
|
Impedance |
50 ohms
unbalanced, 100 ohms
balanced |
Gain error |
¡¾0.1 dB
channel to channel |
Nominal level |
-2 dBu (632
mV) balanced output
-10 dBV (316 mV) unbalanced
output |
Maximum level
(Hi-Z) |
>+15 dBu
(4.36 V), balanced at 1%
THD+N, with external power
supply |
Maximum level (600
ohms) |
>+9 dBm
(2.18 V), balanced at 1%
THD+N, with external power
supply |
|
General |
Power |
Supplied by
an external power supply |
External power
supply |
100 VAC to
240 VAC, 50/60 Hz, external,
autoswitchable; to 12 VDC, 1
A, regulated |
Power input
requirements |
12 VDC |
P/2 DA2x |
0.1 A |
P/2 DA2xi MT |
0.2 A |
Temperature/humidity |
Storage:
-40 to +158 ¡ÆF (-40 to +70
¡ÆC) / 10% to 90%,
noncondensing
Operating: +32 to +122 ¡ÆF (0
to +50 ¡ÆC) / 10% to 90%,
noncondensing |
Rack mount |
Yes, with
optional 1U rack shelf, part
#60-190-01or 60-604-01; or
VersaTools¢ç rack shelf, part
#60-190-20 or 60-604-20;
also under-furniture
mountable with optional
brackets #70-077-01
(optional for P/2 DA2xi,
standard for P/2 DA2xi MT)
or projector mountable with
bracket kit #70-077-04 |
Enclosure type |
Metal |
Enclosure
dimensions |
1.0" H x
4.3" W x 3.0" D (quarter
rack wide)
2.5 cm H x 10.9 cm W x 7.6
cm D
(Depth excludes connectors.) |
Product weight |
0.5 lbs
(0.3 kg) |
Shipping weight |
3 lbs (2
kg) |
Vibration |
ISTA 1A in
carton (International Safe
Transit Association) |
Listings |
UL, CUL |
Compliances |
CE, FCC
Class A, VCCI, AS/NZS, ICES |
MTBF |
30,000
hours |
Warranty |
3 years
parts and labor |
NOTE |
|
All nominal levels
are at ¡¾10%. |
|
NOTE |
|
Specifications are
subject to change
without notice. |
|
(7.52-060206-D6) |
|
|
|